Well that took some time to get right!
Two years in the making of our new Light Stone formulation! Originally discontinued due to production issues which had a member of the team literally sat at the end of our extruder to clearing away the resulting purge during production! After 10 different formulations, we have finally found a blend that gives the same amazing effect but without the production issues that plagued us with our original formulations!
The stone effect really helps blend away the layer lines, making prints look incredible with an almost injection moulded-like finish. As will all filled products we always recommend a .6mm nozzle, although the fomrulation may run initially on a .4 it will block eventually. Having the extra wiggle room with a .6 nozzle is always recommended for any filled product ( Wood, Cork, Glitter, Stone)
Available in PLA in 1.75 mm
Spec
- Material PLA filament
- Diameter 1.75mm + or - 0.03mm
- Filament weight 1 KG gross
- Hotend temp 210 - 225°C (between 60-120mm/s print speed)
- Bed temperature 40-50°C or unheated
- High-speed printing guide available
- Recommendation of 0.6 nozzle
Spool Spec MK19
- 65mm W
- 194 mm D
- 70 mm Axle
- Card Construction
- Airtight Bag with desiccant
AMS, Dry Box & Roller unloader user please use MK19 Edge Protectors
Light Stone Effect 2.0 PLA 1.75mm UK Made 3D Printing Filament
Brought to you from our Factory in Greater Manchester (United Kingdom) we are looking to expand our range with new exciting materials and colours. We have tested a wide range of filaments over the years and we are now very happy with the product we now have. We are holding a tolerance of +-0.03 of a mm (Over 52 kilometer run, a human hair is .04) and we use only the highest quality material on the market. With these tolerances and high quality materials it will help take the guess work out of 3D printing.