top of page

So looking for a PLA that can handle higher temps* or a material with more impact resistance than our standard PLA ? Well look no further than our new PLA+ ! Made from Natureworks 3D850 high crystalline material allows for some impressive improvements over our base 4043D PLA. With the ease of printing that you come to expect from all 3DQF filaments, this new PLA+ is sure to impress. Super smooth flowing and specifically developed for 3D printing! 

Available in a selection of bright and vibrant colours and with super smooth printing performance there's a lot to like about this new range. colours and effects will expand in due course with some exciting products and effects in the pipeline 


What is PLA+


So not all PLA+ are made the same, its worth pointing this out. We have found that a lot of marked PLA+ is in-fact our base grade of polymer which is 4043D. Generally when a manufacturer quotes PLA+ all they are stating is it's a better version than their standard grade, but at the same time not telling you what the standard grade is or what grade the PLA+ is.  


For transparency, we disclose our materials and the benefits of each of them. There are two recognized PLA+, 3D850 and 3D870. Both of these polymers expand on the range and scope of what PLA can do. Our 3D850 is a high crystalline material allowing for annealing at 80°C, this improved the materials significantly and allows it to withstand temps in excess of 100°C. The material's impact strength is significantly increased allowing the material to bend and flex while also improving layer bonding while giving sharper prints and more vibrant colours. Warping is also reduced with 3D850 over 4043D. 


Available in 1.75 mm




  • Material PLA filament
  • Diameter 1.75mm + or - 0.03mm        
  • Filament Weight 1 Kg Gross   
  • Print Temperature 220 - 235°C   (between 60-120mm/s print speed)
  • Bed temperature 40-50°C or unheated

Spool Spec        

  • 69mm W           
  • 194 mm D  
  • 70 mm Axle        
  • Card Construction        
  • Airtight Bag with desiccant



  • Smoother flowing material 
  • Higher detail prints
  • Improved temperature handling once annealed
  • Higher Impact resistance 
  • Higher layer strength 
  • Brighter colours 
  • Improve Flexibility


*Higher Temp handling after the annealing stage 

AMS, Dry Box & Roller unloader user please use MK19 Edge Protectors


German Grey PLA + Plus 1.75mm UK Made 3D Printer Filament

SKU: PLA-Plus-003
  • Brought to you from our Factory in Greater Manchester (United Kingdom) we are looking to expand our range with new exciting materials and colours. We have tested a wide range of filaments over the years and we are now very happy with the product we now have. We are holding a tolerance of +-0.03 of a mm (Over 52 kilometer run, a human hair is .04) and we use only the highest quality material on the market. With these tolerances and high quality materials it will help take the guess work out of 3D printing.


We are always interested in new projects, so if you are passionate about your new idea contact us. We are only too happy to lend a hand with Special Sponsorship programs with varying amount of support based off the level of interaction to the 3D Printing community. Be that in Education or individuals with a passion.

bottom of page